IP-CAM

 

IP-CAM

 


--Powerful high-performance programmable media processor
Hi3510, single chip SOC, embedded (ARM+DSP) and high-speed
video protocol processor


--Supporting various high-sensitivity CCD or CMOS sensors
(SONY, SHARP, and so on), and supporting two types of video input
interfaces, that is, analog and digital video input interfaces


--Adopting optimized H.264 video compression algorithm to easily
implement low-band width network transmission of highdefinition
images


--Supporting simultaneous browsing of a maximum of 10 users


--Embedded Web Server to facilitate users to implement real-time
ront-end monitoring and setting management by a standard IE


--Supporting wireless network (WIFI/802.11b/g), mobile
networks (CDMA1X and GPRS), and monitoring by mobile phones


--Providing an SD card slot to facilitate local image storage, 3 hours
recording video via 1G


--Supporting remote system upgrade


--Supporting dynamic domain name resolution, as well as LAN and
Internet (ADSL, Cable Modem)


--Supporting multiple network protocols: HTTP/TCP/IP/UDP/
STMP/DDNS/DNS/SNTP/DHCP/FTP


--Supporting bi-directional call and voice broadcast


--Network adaptation technology, supporting automatic video
frame rate adjustment according to the network bandwidth


--Giving alarm in case of video loss or motion detection (settable
defense zone and sensitivity)


--Various embedded high-speed-dome and decoder protocol,
supporting transparent transmission protocols


--Supporting image shielding/image snapshot


--Automatic fault recovery, and automatic connection after
network interruption


--Motion detection function, and may set detection time area.
 

 
    

Disclaimer & Copyright© 2003 dcjo.com All Rights Reserved.
Developed and Designed by
Matrix IT